Interlocking garage and home gym floor tiles in Twickenham and London
Alex fits interlocking tiles on garage, workshop and home gym floors, laying them neatly on a sound, level base.
9.97/10 from 118 Checkatrade reviews (opens in a new tab)Garage flooring with Alex
Bare concrete is cold, dusty and stains easily. Interlocking garage tiles are heavy-duty plastic tiles that lock together along their edges and sit on top of the concrete, giving you a tough floor that is easy to sweep.
Buying the tiles is the easy part. The floor only looks right and stays put if the concrete underneath is sound and level, and the cuts around doors, posts and drains are neat. That is the part Alex looks after.
Step by step
How the job runs
Look at the floor
Before fitting day
Alex checks the concrete for cracks, dips, oil and dust, then helps you choose a tile, colour and pattern. Send him a few photos and he'll tell you what your floor needs.
Prepare the base
Start of fitting day
The floor is cleared, swept and cleaned. Dips and uneven patches are levelled so no tile can rock.
Set out the layout
Fitting day
Alex plans from the garage door inwards, so full tiles land where they are seen most and the cut tiles finish at the back walls.
Lock the tiles together
Fitting day
Tiles are clipped together row by row, with the small gap at each wall that most makers ask for, because plastic moves slightly as the garage warms and cools.
Cut, check and tidy
Last day
Tiles are cut around door frames, posts and drains, every joint is checked for rocking, and the offcuts are cleared away.
What are interlocking garage floor tiles?
They are heavy-duty plastic tiles with loops and pegs along each edge that clip into the next tile. They sit on the existing concrete and suit garages, workshops and home gyms.
Solid tiles keep spills on the surface, so they wipe clean. Vented tiles have gaps that let water from a wet car drain through. Check the load rating on the pack if you will park a heavy vehicle on them.
Can you lay garage floor tiles on cracked or uneven concrete?
Hairline cracks and surface marks are fine, because the tiles cover them. Wider cracks, dips and high spots need sorting first, since tiles follow the base and rock or open at the joints over a bad patch.
Dust and oil matter too. Dust is swept away and soaked-in oil cleaned off before laying. Alex levels and screeds floors before fitting, so a patchy slab can be put right as part of the same job. Concrete must also be dry enough, and the tile maker's instructions set the limit.
What colour and pattern of garage floor tile should you choose?
Mid-grey or charcoal hides dust, tyre marks and dirt best, so it stays tidy in a working garage. Pale colours look bright but show every mark.
A chequerboard or border looks smart but shows every wobbly cut, so a plain floor is more forgiving in an awkward room. Order a few more tiles than the floor needs, from the same batch, so colours match and you have spares.
Interlocking tiles or LVT for your garage?
Interlocking tiles are right for a working garage. They take cars, tools and wet boots, they sweep clean, and a damaged tile can be unclipped and swapped on its own.
If the garage is becoming a room you live in, such as an office, studio or playroom, LVT (luxury vinyl tiles) usually suits better. It looks like wood or stone, feels quieter underfoot, and needs a smooth, level, dry base. Alex fits both.
See LVT and vinyl tilesWhat affects the cost of garage floor tiles?
- The size and shape of the floor
- The type of tile: solid or vented, standard or heavy duty
- The condition of the concrete, and any levelling it needs first
- How many cuts there are around door frames, posts and drains
- A plain layout or a multi-colour pattern
- Whether the garage has to be cleared first
How to look after garage floor tiles
Sweep or vacuum regularly and mop with warm water and a mild cleaner. Mop up oil and fuel quickly, and avoid harsh solvents unless the tile maker says they are safe.
Put a board under trolley jacks and axle stands to spread the weight. If one tile is ever damaged, it can be unclipped and replaced on its own, so keep a few spares from the same batch.
Mistakes to avoid
- Laying tiles straight over a dipped or cracked slab, so they rock and the joints open.
- Pushing tiles tight against the walls, so they buckle when the garage warms up.
- Leaving oil and dust on the concrete before the tiles go down.
- Ordering exactly the floor area, with no spares for cuts or later repairs.
- Choosing a pale colour for a working garage, then seeing every tyre mark.
Common questions
Garage flooring: common questions
Can you drive a car on interlocking garage tiles?
Yes, if the tiles are made for vehicles, which most garage tiles are. Check the load rating on the pack for heavier cars and vans. Put a board under jacks and axle stands to spread the weight, because a small point load can crack a tile.
Do interlocking garage tiles stay in place?
Yes. The tiles lock to each other along their edges, so the floor holds together as one piece while it sits on the concrete. A clean, level slab stops them shifting. A small gap at the walls lets them move slightly with the temperature without buckling.
How long does it take to fit garage floor tiles?
A single garage is typically fitted in a day once the concrete is clean and level. If the floor needs levelling first, allow extra time for it to set, and the product's instructions give that time. Alex gives you a realistic timeframe when he has seen the floor.
How are garage tiles cut around drains and posts?
Each tile is marked against the obstacle and cut to fit, leaving a small, even gap around a post, door frame or drain cover. The layout starts at the door so most cuts fall at the back walls. Water can still reach the drain, and the edge looks neat.
Are interlocking tiles good for a home gym or workshop?
Yes. They are hard-wearing, easy to sweep and kinder underfoot than bare concrete. In a workshop, solid tiles keep spills on the surface. Under heavy gym equipment, a thicker tile or a mat on top spreads the load and protects the tiles.
Free estimate
Get a free quote
Tell Alex about the job and get one clear, written price. Free, and no obligation.